Posted by Tool Man | Posted in Power Tools | Posted on 02-08-2009
Tags: actuated, construction, diy-tools, powder, powder actuated tools, powder actuated tools safety, powder actuated tools training, tools
Pneumatic Actuation Getting it Straight
By: Emma
Pneumatic actuation plays a major role in today's world of computerized automation. It's reliable, economical, and surprisingly easy to use. Understanding pneumatics is a matter of physics. When air inside a container builds up, pressure magnitude is the same at all points within the fluid. The air also pushes out on its vessel uniformly.
Pneumatic actuators leverage this fact of fluid dynamics to provide clean, quiet motion, with less waste heat and electromagnetic interference than their electric counterparts. They also excel in applications involving fast repetitive moves, heavy loads, and very smooth motion profiles.
Here's how it works: Compressed air enters an opening in a cylinder and pushes against the interior, including the one wall that can move: the piston. If the difference in force across the piston is larger than the total attached load plus frictional forces, the piston floor drops out. The resulting net force (proportional to the force to mass ratio) accelerates the load, converting pneumatic to linear mechanical power. With air power as the driving force, pneumatic actuators are safe for hazardous environments where electric sparks must be avoided.
Calculating force
Single-rod double-acting pneumatic actuators — those with air ports on both sides of the internal piston — are the most common in industry. We'll now explore the physics behind pneumatic motion, using this type as our example.
All pneumatic force depends on two things: air pressure and piston area. Let's say air pressure is set at 50 psi. If the diameter of the piston is 7 mm, then it has an effective surface area of 38 mm2. Force, then, is the product of pressure and area:
Force = Pressure × Area
Converting from psi to N/mm2, pushing force equals 13.1 N. However, notice that the piston rod reduces the effective area on its side, meaning that pull force is not as great as push force. Specifically, for pull force:
Effective area = Piston area - Rod area
If we assume the rod is 3 mm in diameter, then the rod area is 7.069 mm2. The effective area becomes 30.931 mm2 for a pull force of 10.66 N.
In contrast, double-rod double-acting actuators have equal push and pull forces and can be used for both actions. Rodless variations too have equal push and pull force, but higher than that of double-rod types for the same bore. Since its output linkage isn't contained, the internal piston drives an external slide as it moves. Similarly, cable air actuators have an external slide tied with a cable that's wrapped around a pulley at each piston end.
No matter what cylinder type is used, correct sizing is essential. Bigger cylinders — though they increase system natural frequency and allow faster accelerations — require larger, more expensive compressor pumps to power the system. As with any motion technology, oversizing is something to avoid.
Powering up
Compressors use mechanical power to generate pneumatic force, supplying the pressurized air that moves cylinder pistons. This kind of powering has distinct advantages. Most importantly, one economical air compressor and some readily available air can power several axes and devices. That's because the compressor only needs to supply the average amount of air required by the application per machine cycle. (Shortly, we'll talk more about what makes this true.) Compressors can also be installed where space is not critical. With the powering unit removed from the action, pneumatic actuators at points of motion can be small compared to the power they produce. They're also suitable for environments where contamination is unacceptable.
In heavier lifting applications, a sufficiently sized compressor can move any load put to its cylinders. Where positioning is the main objective — a sophisticated but increasingly common pneumatic application — the proper size ensures controlling pressure can move systems at adequate velocity and acceleration rates. However, another essential element in pneumatic power systems, pressure reservoirs, must also be present and sized correctly. (Note: Oversized compressors do not eliminate the need for reservoirs.)
Pressure reservoirs, also called accumulators, are precharged to store air under pressure when the system isn't moving. Their stored capacity takes care of loading when there is more than one actuator in the system — in effect, acting as pneumatic capacitors by storing air pressure for later use.
Accumulators are helpful for two reasons: They keep system pressure relatively constant, and store energy. The former is important for accurate motion control and smoothness when moving slowly; the latter allows for quick, dramatic power and eliminates the need to size compressors for peak loads. To function effectively, accumulators must be placed near the pneumatic system's inlets/outlets, which we discuss next.
About the Author
nb-sm.net is engineered for high performance,In addition to pioneering design, high-impact technology, and durability, our Pneumatic means customer value.you can buy Pneumatic from us.
Article Source: http://www.articlesbase.com/ - Pneumatic Actuation Getting it Straight
 |
 POWER P2201 POWDER ACTUATED FASTENING KIT  US $150.00 |  remington 481 482 powder actuated fastening tool US $75.00 |  Hilti DX 351 US $450.43 |
 Remington 490 Powder Actuated Tool Model No 490 US $18.00 |  Remington powder actuated tool US $.99 |  ITW RAMSET RED HEAD D60 25 CALIBER NAIL DRIVER POWDER ACTUATED US $45.95 |
 ITW RAMSET S 38 LOW VELOCITY POWDER ACTUATED TOOL US $100.00 |  REMINGTON Powder Actuated Tool 476 US $.99 |  Ramset Master Shot Powder Actuated Fastener Gun US $39.99 |
 HILTI DX 860 HSN Powder Actuated Fastening Tool 7 8 in 3 4 in US $125.51 |  Mig Welder Welding Torch LED Light US $33.94 |  Remington 495 Powder Actuated Tool NO RESERVE US $21.61 |
 Ramset COBRA 27 Cal Semi Automatic Strip Powder Actuated Tool Concrete Gun WW US $53.00 |  Hilti DX 460 F 8 Powder Actuated Fastening Tool US $152.50 |  Hilti DX 460 F8 powder actuated tool EXC US $205.00 |
 HILTI DX E72 POWDER ACTUATED TOOL US $55.00 |  Ramset Mastershot Powder Actuated Trigger Tool US $34.99 |  Hilti DX E72 Powder Actuated Fastening Tool US $29.99 |
 Park Tool PRS 4 W 2 Professional Wall Mount Stand and 100 3D Clamp Single US $248.99 |  Lot of Powder Actuated Loads and Fasteners Hilti Remington Simpson 27 Cal US $1.25 |  Ramset Cobra US $100.00 |
 NEW Powers Fasteners 50506 Yellow 22 Cal Load 100 Sho US $5.49 |  Hilti DX E72 Powder Actuated Tool US $169.99 |  HILTI 25 Caliber Red Booster Loads Short CAL63 10M For HILTI DX35 US $22.99 |
 DX 460 MX Powder actuated fastening tool US $374.99 |  VINTAGE REMINGTON POWDER ACTUATED TOOL US $5.00 |  ITW Ramset Red Head T3FUELPK T3SS Fuel Cell 2pk US $41.85 |
 Remington Powder Actuated Tool US $20.00 |  Hilti X ZF32 MX Powder Concrete Fastener 1 1 4 32 mm Collated Pins 1000 US $85.49 |  Remington Lo Velocity Power Head Fastener Square Washer US $10.99 |
 Clearance Powers Fasteners Simpson 50502 Brown 22 Cal US $3.99 |  HILTI DX351 POWDER ACTUATED TOOL US $200.00 |  Ramset Viper 027 Caliber Semi Automatic Powder Actuated Tool NR US $90.00 |
| Powered by phpBay Pro |
 | Ramset Powder Fastening Systems 1524SDP 3-Inch Washered Pins, 100 Pack List Price:  |
Description100 per box. .300 head diameter drive pins. Designed for use in concrete and structural steel applications. ITW Ramset powder actuated fasteners are specifically fabricated to meet the exacting requirements of toughness and durability... |
 | Ramset RS-22 .22 Cal Single Shot Trigger Operated Powder Actuated Tool Sale Price: $69.99 |
DescriptionRemington Power Trigger. Designed for frequent use providing professional results in a variety of concrete, masonry, or steel applications. Traditional trigger operated tool. Positive barrel and load retention prevent barrel from opening freely, allowing easy horizontal and overhead fastening... |
 | Trigger Tool Kit, 22 Caliber List Price: |
DescriptionDesigned for frequent use providing professional fastening results in a variety of concrete, masonry or steel applications. Positive barrel and load retention prevents barrel from opening freely, allowing easy horizontal and overhead fastening... |
 | Desa #R360 .22 Cal PAT Tool/Bag Sale Price: $59.00 |
DescriptionUses .22 caliber low-velocity loads, 1 gray to 4 yellow. Fastener sizes are 1/2" to 3" straight watered and specialty pins. Fastener diameter is .300 flat head pins. Cushioned pistol-grip handle with knuckle guard... |
Hilti DX36M training session